Indirect multi-emulsions of essential oils, wetting and filming oils for cosmetological use, biodegradable in the aqueous phase.
Contains a vegetable thixotropic that favors the uniformity of the film. It has exceptional cleaning, polishing and brightening power, gives uniformity to the treated surfaces and has a protective effect against smog. On glass and transparent surfaces, it does not leave iridescence.

GENERAL INSTRUCTIONS FOR USE

Apply the product by hand or by machine with special pads or soft rags. Allow the product to dry and remove the residue formed with clean rags or pads. 100 g. of product are sufficient to polish 3/4 square meters of surface. Dilution with water is recommended, particularly in summer.
SOLUBILITY: unlimited in water.

Extra-mordant abrasive paste based on emulsifiers and special abrasives, suitable for polishing gelcoat, finished products and molds. Its special formulation with high grinding power allows the rapid polishing of surfaces with high hardness and the removal of marks and scratches of medium depth.

GENERAL INSTRUCTIONS FOR USE

Ready to use product. If necessary, dilute with water or solvent (naphtha, petroleum). Thoroughly clean the surface to be treated and make sure it is free of grease and foreign substances. Spread the paste evenly over the entire surface, making sure the surface is cold.

Use with a polisher at a speed between 1000 — 1500 rpm and with special pads.
Avoid overheating the gelcoat by operating for too long on the same area. At the end of polishing, remove any paste residues with clean rags or pads. To obtain greater brilliance, complete the polishing with Polish L80. In its original packaging, the product can be used for 2 years if stored indoor away from direct sunlight and away from heat sources.

Creamy abrasive paste based on emulsifiers and special abrasive charges suitable for polishing.
It allows the quick polishing of medium/hard surfaces and the removal of dirt and scratches of small depth.

GENERAL INSTRUCTIONS FOR USE

Ready to use product. If necessary, dilute with water or solvent (naphtha, petroleum). Thoroughly clean the surface to be treated and make sure it is free of grease and foreign substances. Spread the paste evenly over the entire surface, making sure the surface is cold.

Use with a polisher at a speed between 1500 — 2000 rpm and with special pads.
Avoid overheating the surface by working on the same area for too long. At the end of polishing, remove any paste residues with clean rags or pads. To obtain greater brilliance, complete the polishing with Polish L80. In its original packaging, the product can be used for 2 years if stored indoor away from direct sunlight and away from heat sources.