BONDING PASTES Archivi

See other bonding pastes

GV22

Vinylester bonding paste for lamination

Vinylester bonding paste reinforced with glass microfibers, characterized by remarkable thermal and mechanical properties other than excellent adhesion and flexibility. Specifically formulated to assemble and repair fiberglass laminates, during the lamination phases for filling strips and joints thanks to its excellent adhesion to the substrate and its high mechanical and anti-osmosis properties. Contains viracolor.

SUPPORTS

Recommended: Fiberglass polyester and vinylester laminates.

GENERAL INSTRUCTIONS FOR USE

Packaging

Type of use

PLUG
MOULD-LAMINATION
FITTING-OUT

See other bonding pastes

GV21

Vinylester bonding paste with microfibres

Vinylester bonding paste reinforced with microfibers, characterized by remarkable thermal and mechanical properties other than excellent adhesion and flexibility. Specifically formulated to assemble and repair fiberglass laminates, during the lamination phases for filling strips and joints thanks to its excellent adhesion to the substrate and its high mechanical and anti-osmosis properties. Contains viracolor.

SUPPORTS

Recommended: Fiberglass polyester and vinylester laminates.

GENERAL INSTRUCTIONS FOR USE

Packaging

Type of use

LAMINATION-ASSEMBLING
MOULD-LAMINATION
BODY-FINISHING

See other bonding pastes

GV20

Vinylester bonding paste with fibres

Vinylester bonding paste reinforced with glass fibers, characterized by remarkable thermal and mechanical properties other than excellent adhesion and flexibility. Specifically formulated to assemble and repair fiberglass laminates, during the lamination phases for filling strips and joints thanks to its excellent adhesion to the substrate and its high mechanical and anti-osmosis properties. Contains viracolor.

SUPPORTS

Recommended: Fiberglass polyester and vinylester laminates.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure that the substrate is free of dust, fibers, dirt and surface condensation. Carefully mix the vinylester bonding paste with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount required depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C. It must be applied manually with a spatula. For quantities over 5 kg mixing with a stirrer is recommended; for 200 l drums the use of a pressing plate extruder-mixer guarantees the best mixing efficiency.
In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

LAMINATION-ASSEMBLING
FITTING-OUT
BODY-FINISHING

See other bonding pastes

G8

Industrial bonding paste with fibres

Multi-purpose bonding paste based on unsaturated polyester resins reinforced with fibres, easily spreadable and with good mechanical properties, adhesion, sandability and flexibility. It is used for filling, assembling and leveling fiberglass products.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0- 2,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. For quantities over 5 kg, mixing with a stirrer is recommended.
In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

LAMINATION-ASSEMBLING
FITTING-OUT

See other bonding pastes

G7

Industrial bonding paste with microfibres

Multi-purpose bonding paste based on unsaturated polyester resins reinforced with microfibres, easily spreadable and with good mechanical properties, adhesion, sandability and flexibility. Is used for filling, assembling and leveling fiberglass products.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0 — 2,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. For quantities over 5 kg, mixing with a stirrer is recommended.
In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

LAMINATION-ASSEMBLING
FITTING-OUT

See other bonding pastes

G6

Bonding paste for assembly

Bonding paste based on unsaturated polyester resins reinforced with special mineral microfibers.
It has good mechanical, thermal and chemical resistance and excellent adhesion to the substrate. In the composite sector, it represents a practical and economical solution for the assembly of the model skeleton, the joining of the side parts, the gluing of the inserts, the fixing of furniture and systems.
It can be used with paste or liquid hardener.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

GENERAL INSTRUCTIONS FOR USE

Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0 — 3,0 % of hardener in paste (benzoyl peroxide) or with 1,0 — 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

MOULD-LAMINATION
LAMINATION-ASSEMBLING
FITTING-OUT

See other bonding pastes

B15T

Bonding paste plus with fibres tixo

Adhesive bonding paste reinforced with fibres based on unsaturated polyester resins, microspheres and light reinforcing fillers, characterized by high tixotropy. Used in the composite sector for its excellent adhesion for the bonding of laminates and inserts of various types. The reinforcing fibers give this product high mechanical strength, making it suitable for bonding floors and ceilings, for layering of laminate, positioning of bulkheads, and gluing of inserts.

SUPPORTS

Recommended: fiberglass polyester and vinylester, wood, various types of foam.

GENERAL INSTRUCTIONS FOR USE

Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the mastic with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 16 and 28°C. The product contains viracolor. It must be applied manually with a spatula after careful mixing the hardener. For quantities over 5 kg. mixing with a stirrer is recommended. In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C. Some drift may occur in gel time.

Packaging

Type of use

MOULD-LAMINATION
LAMINATION-ASSEMBLING

See other bonding pastes

B15R

Bonding paste plus with fibres rapid

Adhesive bonding paste reinforced with fibres based on unsaturated polyester resins, microspheres and light reinforcing fillers, characterized by a rapid gel time. Used in the composite sector for its excellent adhesion for the bonding of laminates and inserts of various types. The reinforcing fibers give this product high mechanical strength, making it suitable for bonding floors and ceilings, for layering of laminate, positioning of bulkheads, and gluing of inserts.

SUPPORTS

Recommended: fiberglass polyester and vinylester, wood, various types of foam.

GENERAL INSTRUCTIONS FOR USE

Apply on well sanded and cleaned surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the mastic with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 16 and 28°C. The product contains viracolor. It must be applied manually with a spatula after careful mixing the hardener. For quantities over 5 kg. mixing with a stirrer is recommended. In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C. Some drift may occur in gel time.

Packaging

Type of use

MOULD-LAMINATION
LAMINATION-ASSEMBLING

See other bonding pastes

B15L

Bonding paste plus with fibres liquid

Adhesive bonding paste based on unsaturated polyester resins reinforced with fibers and light reinforcing fillers, characterized by high fluidity.
The reinforcing fibres give this product high mechanical strength and the particular fluidity makes it particularly suitable for rounding and filling corners and moldings, both immediately behind the gelcoat or the first MAT, and in the positioning of bulkheads and inserts.

SUPPORTS

Recommended: fiberglass polyester and vinylester, wood, various types of foam.

GENERAL INSTRUCTIONS FOR USE

Packaging

Type of use

MOULD-LAMINATION
LAMINATION-ASSEMBLING

See other bonding pastes