RV2015R is a pre-accelerated, thixotropic vinylester resin to be used as a thin layer, in the creation of the mould or other composite parts.
and heat resistance necessary for the realization of a durable mold that requires reduced maintenance, increase the resistance to breakage of the gelcoat caused by flexing and impact of the laminate, increase the resistance to osmosis, and allows to obtain composite parts with excellent hardness.
When high thermo-mechanical properties are required in the finished product, it can also be used as a resin in the entire lamination process.

GENERAL INSTRUCTIONS FOR USE

RV2015 can be applied by manual or spray lamination. Catalysis 1,0% — 2,0% of the total weight of the resin with CT21 hardener (Methylethylketone Peroxide / Butanox M50). The best results are obtained by working at temperatures between 18°C and 30°C and with a relative humidity rate between 40% and 90%. It is recommended to maintain constant application conditions in order to have constant viscosity and gel times. In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.