Bonding paste for assembly

Bonding paste based on unsaturated polyester resins reinforced with special mineral microfibers.
It has good mechanical, thermal and chemical resistance and excellent adhesion to the substrate. In the composite sector, it represents a practical and economical solution for the assembly of the model skeleton, the joining of the side parts, the gluing of the inserts, the fixing of furniture and systems.
It can be used with paste or liquid hardener.


Recommended: polyester and vinylester fiberglass, wood.


Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0 — 3,0 % of hardener in paste (benzoyl peroxide) or with 1,0 — 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.


Type of use