Bonding paste for lamination with fibres

Polyester bonding paste reinforced with glass fibres, characterized by excellent mechanical properties, adhesion and flexibility.
Multi-purpose formulation for the composite sector, for spot joining of the side parts, positioning of bulkheads and inserts, and bonding of floors and ceilings. Contains viracolor.


Recommended: sanded fiberglass, wood.


Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0- 2,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. For quantities over 5 kg, mixing with a stirrer is recommended. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.


Type of use