Adhesive bonding paste based on unsaturated polyester resins reinforced with fibers and light reinforcing fillers, characterized by high fluidity.
The reinforcing fibres give this product high mechanical strength and the particular fluidity makes it particularly suitable for rounding and filling corners and moldings, both immediately behind the gelcoat or the first MAT, and in the positioning of bulkheads and inserts.

SUPPORTS

Recommended: fiberglass polyester and vinylester, wood, various types of foam.

GENERAL INSTRUCTIONS FOR USE

Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the mastic with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 16 and 28°C. The product contains viracolor. It must be applied manually with a spatula after careful mixing the hardener. For quantities over 5 kg. mixing with a stirrer is recommended. In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C. Some drift may occur in gel time.