RS2040 is a filled and pre-accelerated unsaturated polyester resin with low styrene content.
RS2040 has been designed for the rapid lamination with results of excellent surface finishes and high dimensional stability of the moulds. Thanks to its high wettability, RS2040 is formulated specifically for manual application or by roller-brush. RS2040 hardens very well at room temperature both with 1 layer of MAT and with 4 or more layers of MAT applied wet on wet. The RS2040 is particularly suitable for the production of large surfaces and also for the production of moulds used in infusion process: characterized by a low exothermic peak, a low volumetric, low linear shrinkage and an high tixotropy that allows to work quickly without dripping, and a low styrene content that allows to operate with low styrene emission, significantly improving the work environment and exposure of the operators.

RS2030 is a filled and pre-accelerated unsaturated polyester resin with low styrene content.
RS2030 has been designed for the lamination with results of excellent surface finishes and high dimensional stability of the moulds. RS2030 hardens very well at room temperature both with 1 layer of MAT and with 4 or more layers of MAT applied wet on wet. The RS2030 is particularly suitable for the production of large surfaces and also for the production of moulds used in infusion process: characterized by a low exothermic peak, a low volumetric, low linear shrinkage and an high tixotropy that allows to work quickly without dripping, and a low styrene content that allows to operate with low styrene emission, significantly improving the work environment and exposure of the operators.

RV2015R is a pre-accelerated, thixotropic vinylester resin to be used as a thin layer, in the creation of the mould or other composite parts.
and heat resistance necessary for the realization of a durable mold that requires reduced maintenance, increase the resistance to breakage of the gelcoat caused by flexing and impact of the laminate, increase the resistance to osmosis, and allows to obtain composite parts with excellent hardness.
When high thermo-mechanical properties are required in the finished product, it can also be used as a resin in the entire lamination process.

GENERAL INSTRUCTIONS FOR USE

RV2015 can be applied by manual or spray lamination. Catalysis 1,0% – 2,0% of the total weight of the resin with CT21 hardener (Methylethylketone Peroxide / Butanox M50). The best results are obtained by working at temperatures between 18°C and 30°C and with a relative humidity rate between 40% and 90%. It is recommended to maintain constant application conditions in order to have constant viscosity and gel times. In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.