Polyester putty with glass fibres for high mechanical resistance filling and smoothing, even of high thickness. Formulated with high thixotropy and easy spreadability, it is used for the repair, filling and grouting of damaged surfaces, for the assembly of semi-finished and fibreglass products and for the assembling of plug frame and base.

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure the substrate is free of dust, fibers, dirt and surface condensation. On the sheets, eliminate any residual oxide; degrease with antisilicone thinner. Carefully mix the putty with 1,0 – 3,0% of hardener in paste (benzoyl peroxide), bearing in mind that the quantity of required hardener, depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C.
It must be applied manually with a spatula in one or more layers until the required thickness is reached. Generally recommended dry sanding cycle, grits: P80-P120-P220. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.