Multipurpose polyester bonding paste reinforced with mineral fibers.
The excellent adhesion to the support, the excellent spreadability and a rapid and complete leveling even on large thicknesses, make it a useful product on the construction site: both as a general assembly mastic (model skeleton, tacking of the side members, fixing of the bulkheads, interior fitting ) and as a putty for filling bonded joints and start-up and surface finishing.

G2 (grey)
G2B (white)

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. On the sheets, remove any residual dirt and degrease with anti-silicone thinner. Carefully mix the bonding paste with 1,0 – 3,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula in one or more layers until the required thickness is reached. Sandable after 20 minutes from application at 23°C.
In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.