Fitting-out Archivi | INTEC SLEM

See other Putties

SK40

Fibreglass putty

Polyester putty with glass fibres for high mechanical resistance filling and smoothing, even of high thickness. Formulated with high thixotropy and easy spreadability, it is used for the repair, filling and grouting of damaged surfaces, for the assembly of semi-finished and fibreglass products and for the assembling of plug frame and base.

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure the substrate is free of dust, fibers, dirt and surface condensation. On the sheets, eliminate any residual oxide; degrease with antisilicone thinner. Carefully mix the putty with 1,0 – 3,0% of hardener in paste (benzoyl peroxide), bearing in mind that the quantity of required hardener, depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C.
It must be applied manually with a spatula in one or more layers until the required thickness is reached. Generally recommended dry sanding cycle, grits: P80-P120-P220. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

PLUG
FITTING OUT
BODY-FINISHING

See other Putties

SK1

Polyester Putty Grey

Finishing putty based on polyester resins for general use.
Used in the composite sector for the assembling of plug frame and base, the positioning of bulkheads, the gluing of inserts and the finishing of bonded joints.
Formulated to guarantee high spreadability, excellent leveling and deaeration for a complete absence of porosity, good adhesion to the support and long storage resistance.

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates; Raw degreased and sanded metal sheet.

GENERAL INSTRUCTIONS FOR USE

Packaging

Type of use

PLUG
FITTING-OUT
BODY-FINISHING

See other Putties

GV22

Vinylester bonding paste for lamination

Vinylester bonding paste reinforced with glass microfibers, characterized by remarkable thermal and mechanical properties other than excellent adhesion and flexibility. Specifically formulated to assemble and repair fiberglass laminates, during the lamination phases for filling strips and joints thanks to its excellent adhesion to the substrate and its high mechanical and anti-osmosis properties. Contains viracolor.

SUPPORTS

Recommended: Fiberglass polyester and vinylester laminates.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure that the substrate is free of dust, fibers, dirt and surface condensation. Carefully mix the vinylester bonding paste with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount required depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C. It must be applied manually with a spatula. For quantities over 5 kg mixing with a stirrer is recommended; for 200 l drums the use of a pressing plate extruder-mixer guarantees the best mixing efficiency. In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

PLUG
MOULD-LAMINATION
FITTING-OUT

See other Bonding Pastes

GV20

Vinylester bonding paste with fibres

Vinylester bonding paste reinforced with glass fibers, characterized by remarkable thermal and mechanical properties other than excellent adhesion and flexibility. Specifically formulated to assemble and repair fiberglass laminates, during the lamination phases for filling strips and joints thanks to its excellent adhesion to the substrate and its high mechanical and anti-osmosis properties. Contains viracolor.

SUPPORTS

Recommended: Fiberglass polyester and vinylester laminates.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure that the substrate is free of dust, fibers, dirt and surface condensation. Carefully mix the vinylester bonding paste with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount required depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C. It must be applied manually with a spatula. For quantities over 5 kg mixing with a stirrer is recommended; for 200 l drums the use of a pressing plate extruder-mixer guarantees the best mixing efficiency.
In its original packaging, the product can be used for 6 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

LAMINATION-ASSEMBLING
FITTING-OUT
BODY-FINISHING

See other Bonding Pastes

G8

Industrial bonding paste with fibres

Multi-purpose bonding paste based on unsaturated polyester resins reinforced with fibres, easily spreadable and with good mechanical properties, adhesion, sandability and flexibility. It is used for filling, assembling and leveling fiberglass products.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0- 2,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. For quantities over 5 kg, mixing with a stirrer is recommended.
In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

LAMINATION-ASSEMBLING
FITTING-OUT

See other Bonding Pastes

G7

Industrial bonding paste with microfibres

Multi-purpose bonding paste based on unsaturated polyester resins reinforced with microfibres, easily spreadable and with good mechanical properties, adhesion, sandability and flexibility. Is used for filling, assembling and leveling fiberglass products.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0 – 2,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. For quantities over 5 kg, mixing with a stirrer is recommended.
In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

LAMINATION-ASSEMBLING
FITTING-OUT

See other Bonding Pastes

G6

Bonding paste for assembly

Bonding paste based on unsaturated polyester resins reinforced with special mineral microfibers.
It has good mechanical, thermal and chemical resistance and excellent adhesion to the substrate. In the composite sector, it represents a practical and economical solution for the assembly of the model skeleton, the joining of the side parts, the gluing of the inserts, the fixing of furniture and systems.
It can be used with paste or liquid hardener.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

GENERAL INSTRUCTIONS FOR USE

Make sure the substrate is free of dust, fibres, dirt and surface condensation. Carefully mix the bonding paste with 1,0 – 3,0 % of hardener in paste (benzoyl peroxide) or with 1,0 – 2,0% of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula after careful mixing of the hardener. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

MOULD-LAMINATION
LAMINATION-ASSEMBLING
FITTING-OUT

See other Bonding Pastes

G2 / G2B

Universal assembling bonding paste

Multipurpose polyester bonding paste reinforced with mineral fibers.
The excellent adhesion to the support, the excellent spreadability and a rapid and complete leveling even on large thicknesses, make it a useful product on the construction site: both as a general assembly mastic (model skeleton, tacking of the side members, fixing of the bulkheads, interior fitting ) and as a putty for filling bonded joints and start-up and surface finishing.

G2 (grey)
G2B (white)

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; Make sure the substrate is free of dust, fibres, dirt and surface condensation. On the sheets, remove any residual dirt and degrease with anti-silicone thinner. Carefully mix the bonding paste with 1,0 – 3,0 % of liquid hardener (methylethyl ketone peroxide), bearing in mind that the amount of hardener required depends on the temperature of use and the processing times required. The recommended temperature range is between 12 and 30°C. It must be applied manually with a spatula in one or more layers until the required thickness is reached. Sandable after 20 minutes from application at 23°C.
In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.

Packaging

Type of use

PLUG
MOULD-LAMINATION
FITTING-OUT
BODY-FINISHING

See other Bonding Pastes