SK50
Transparent putty for carbon support

Transparent putty based on special polyester resins.
Excellent spreadability and applicability even vertically. Particularly suitable for transparent grouting, without the occurrence of streaks. The transparency of the grouting remains up to a maximum of 2 mm thick.
SUPPORTS
Carbon.
GENERAL INSTRUCTIONS FOR USE
Apply on well cleaned sanded surfaces; make sure that the substrate is free of dust, fibers, dirt and surface condensation. Carefully mix the putty with 1,0 – 2,0% of liquid hardener CT21 (methylethyl ketone peroxide), bearing in mind that the quantity of required hardener, depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C. It must be applied manually with a spatula. Once the product has been applied, it is possible to smooth and polish the surface after 6-8 hours. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.