SK3

Stratos Putty


Spreadable polyester putty characterized by both excellent filling capacity and easy sanding.
It is a putty suitable for general use, used for leveling of counterparts and sides, for finishing of bonded joints and repairing of scratches and small cracks. Optimal deaeration, no tension and a complete absence of porosity. Its perfect adhesion to any laminate is combined with low shrinkage and excellent sanding properties.

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates; Raw degreased and sanded metal sheet.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure that the substrate is free of dust, fibers, dirt and surface condensation. On the sheets, eliminate any residual oxide; degrease with antisilicone thinner. Carefully mix the putty with 1,0 – 3,0% of hardener in paste (benzoyl peroxide), bearing in mind that the quantity of required hardener, depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C.
It must be applied manually with a spatula in one or more layers until the required thickness is reached. Generally recommended dry sanding cycle, grits: P80-P120-P220. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.


Packaging

Type of use


PLUGBODY-FINISHING

See other Putties