Flexible spreadable polyester putty, characterized by high flexibility, excellent filling capacity and easy sanding.
It is a putty suitable for grouting large surfaces: used in the composite sector for plug shaping with standard/hand way, leveling of counterparts and sides. Optimal deaeration, no tension and a complete absence of porosity. Its perfect adhesion to any laminate is combined with low shrinkage, excellent sandability and high thermal resistance.

SUPPORTS

Recommended: polyester and vinylester fiberglass laminates; Raw, degreased and sanded metal sheet.

GENERAL INSTRUCTIONS FOR USE

Apply on well cleaned sanded surfaces; make sure the substrate is free of dust, fibers, dirt and surface condensation. On the sheets, eliminate any residual oxide; degrease with antisilicone thinner. Carefully mix the putty with 1,0 – 3,0% of hardener in paste (benzoyl peroxide), bearing in mind that the quantity of required hardener, depends on the temperature of use and the processing times required. The recommended temperature range of use is between 12 and 30°C.
It must be applied manually with a spatula in one or more layers until the required thickness is reached. Generally recommended dry sanding cycle, grits: P80-P120-P220. In its original packaging, the product can be used for 12 months if stored indoor away from direct sunlight, at temperatures not exceeding 20°C.